Internet television - setup

[sony40w5500]

Hi Eugene!

Your program is very good!
I just tried to set up a tv online stream. But I couldn't play anything on my Sony 40W5500.
Now I can listening to online radios on my television, but no web TV-s.
Could you please show an example, how to set up in the program an on-line TV broadcast?

Thanks!

[tomas]

Hi sony40w5500!

Can you advice me please how to add online radio to WMS ?

[sony40w5500]

Hi sony40w5500!

Can you advice me please how to add online radio to WMS ?

Hi Tomas!

Just click on Music button, then choose Internet Radio on the left.
Then click right mouse button on the right side, choose Add link.
To "Path" line write the radio link, for example: http://radiator.nci.de:8000/high_q
Read properties from file button and OK.

Now you'll see the radio channel on your TV in the music section, Internet Radio!

[Eugene]

Hi,

Your program is very good!
I just tried to set up a tv online stream. But I couldn't play anything on my Sony 40W5500.
Now I can listening to online radios on my television, but no web TV-s.
Could you please show an example, how to set up in the program an on-line TV broadcast?

1. Verify that the link VLC plays.
2. In program activate the section Internet TV.
3. In the list of films on right click "mouse" - Add link, in the Path field to specify a link - OK.
4. Settings - Transcoder - Profiles - "Internet-television" - Edit, find the line 'mpeg1' and replaced by 'ps' - OK - OK - OK.
5. In the list of films on right click "mouse" to implement the transcoding test, make sure that there are no errors. If the setup program's on the page Transcoder specified directory, you can check transcoded file and increase its size.
6. Run the play on TV.

[sony40w5500]

Thanks!!!
It works!!! Great!

[rc4991]

I am also trying to get internet tv to work. I tried to follow your directions, but am confused.

I have VLC. I added the link. But I can not find where to edit the transcoding profile.
I go to settings - transcoder. From here I can select a profile for internet TV, but not to edit.
I'm then not able to find the mpeg1 reference which you suggest needs to change to ps.

Can you clarify this step?
Thanks.

[Eugene]

I am also trying to get internet tv to work. I tried to follow your directions, but am confused.

I have VLC. I added the link. But I can not find where to edit the transcoding profile.
I go to settings - transcoder. From here I can select a profile for internet TV, but not to edit.
I'm then not able to find the mpeg1 reference which you suggest needs to change to ps.

Can you clarify this step?

Button Profiles

[rc4991]

Screen shot please.

[Eugene]

Screen shot please.

profiles.JPG (20.88 KiB) Viewed 23677 times

[mikek]

Any chance someone could post more detailed instructions on how to set a link to Internet TV. I get most of what is being said but like others still need some help.

I would be great if there was a Guide section where this sort of stuff was posted

thanks Mike